XH-M604 Charge Control Module DC6-60V Storage Lithium Battery Switch Overcharge Protection Board Controller Power Control Module

Feature:
【Main Functions】: This charge controller is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage. Settable battery charging controller board for DC6-60V lithium ion battery also comatible with solar panel. High-power 30A relay output meets the needs of large-capacity battery charging
【LED Screen Display & Low Power Consumption】: 3 digit red LED display the parameter. Exceeding the set stop voltage value, the relay will cut off the charger charging, no need to manually pull the charger, automatically power off, can not save energy, and can extend the battery life and prevent overshoot
【Easy to Use】: On-board momentary push button to set the charging initiation voltage and charging stop voltage. Input Voltage:DC 6-60V (max 80V), Display Precision:0.1V, Control Precision:0.1V, Output Type:direct output
【Diverse Usages】: Battery charging control module is suitable for solar cells, new energy batteries, electric vehicle batteries, lithium-ion batteries, polymer batteries, .( Maximum support battery 48V), use in home charger, solar energy, wind generator and more
How to Use:
* The factory default starting voltage is 12V, and the stop voltage is 14V.
* Connect the battery first (it will not be displayed if the battery is not connected)
Set the Start Voltage:
* Normal display voltage state, press to a starting voltage button ,to display the start charging voltage. long Press the start button 3 seconds, digital flashes, by start and stop button, set the start charging voltage value.
Set Stop Voltage:
* Normal Voltage normal display mode, press to a Stop voltage button ,to display the Stop charging voltage. long Press the Stop button 3 seconds, digital flashes, by start and stop button, set the Stop charging voltage value.
Setting Error:
* Press and hold the start/stop button while power is on, digital display 888, which is the factory setting.
Reference Formula:
* Charging Voltage = rated voltage×0.9, charging current = rated current×0.1, stop voltage = rated voltage × 01.2
Parameters:
Input Voltage: DC 6-60V
Display Accuracy: 0.1V
Control Accuracy: 0.1V
Output Type: direct output
Voltage Tolerance: ±0.1V
Size: 81 x 54 x 24 mm/3.19 x 2.13 x 0.94inch
Application Fields: 6-60V storage battery
Package Included:
1/2PCS XH-M604 Charge Control Module
(please choose the model and quantity you need,we will send the goods according to your choice.)
Note :
* When setting the voltage, if it stops at a certain value, it can not be set. You can set another voltage first, and then set this voltage. This is not a circuit and program fault.
* Because it is to charge the battery, the positive and negative poles must be connected. If there is any problem that the wiring process cannot be determined or has doubts, you can use a multimeter or other indirect safety method to detect. Do not blindly connect.
* Manual measurement, with small error. Please check size in detail before purchase.
* Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.